Microlinks UM06 - user guide Manual do Utilizador

User’s Guide DiGi Microscope Version 1.2A

8 (2595*1944). The FOV becomes smaller and magnification becomes higher. (9) Status Bar : On/Off Displays or hides the status bar. Each

9 (9-3) M：(Magnification) The magnification size will change depending on the lens position, screen size, and image ratio. For more information, ple

10 again to return to preview. (12) Sharpness : On/Off sharpness mode. Please refer to Section 1.2.3-(2). 1.3 Microscope introduction: 1.3.1 I

11 1.3.2 Power/USB/HDMI port (1) Power○d: Power supply is only compatible with the cord in the box. (2) USB○e: The USB cable is used to conn

12 (3) HDMI○f：The HDMI port is used to connect the microscope to a screen. When the device is in HDMI mode, connect the microscope to the screen usi

13 1.3.4 LED/ Light socket (1) LED○h: Provides luminance for object lens 4x; total 30 LEDs (6 LEDS have wider angles as shown in the fi

14 the application program to focus the image. (2) Fixed image sensor position (2-1) In HDMI mode, the status bar will show on the screen (pl

15 1.4.2 Magnification chart 15 image sensor positions had set from the whole area, the image sensor position tells the magnification size, field of

16 (2) Object lens 10X, focus distance from 0.5mm to 1.0mm (0.196 to 0.393 inch.) 1.5 Microscope accessory 1.5.1 Calibrator Mainly used to calibr

17 2. Printed Notice Please read the following information before operating. 2.1 Maintenance Please abide by the following rules while storing or u

18 2.2 Product Specification CMOS Sensor 5 million pixels CMOS senor Lens Object lens 4X: 4/0.10,160/0.17; Object lens 10X: 10/0.25,160/0.17 Magni

19 2.3 Safety Instructions  As an electronic product, please do not use the device in any place in which electronic products are prohibite

Please ask the distributor to fill in the name of the shop, address, purchase date, and other contents to protect your rights and validate your one-

ViTiny UM06 Warranty P r o d u c t Model no S/L nos. P u r ch ase d a t e DD/MM/YYYY Purchaser T e l n o : A d d r e s s Email Distribut

HTTP://WWW.VITINY.COM © MicroLinks Technology Corp. All rights reserve

1 Content 1. Products Introduction ... 2 1.1 Packing Contents ... 2 1.2 IR remote controller ...

2 1. Product Introduction 1.1 Packing Contents The box contains 1 microscope and 10 accessories. The Object Lens 4X is already assembled onto mi

3 If a loss of electricity occur during operation, please reset the operation. (4) Manual focus (4-1) Zoom in ：Zooms in; speed increases when hel

4 1.2.2 Buttons for PC CAM The following buttons are used only for PC Cam mode. (1) PC CAM ：When in PC CAM mode, the USB cable must connect to a P

5 (3) Snapshot ：Takes a 5M picture and delivers it to the application program. 1.2.3 Buttons for HDMI The following buttons are used only for HDM

6 1.2.1-(2) and Section 1.2.3-(7). (2-5) SHARPNESS：  [ON] Sharpens the image.  [OFF] Smooths the image. (2-6) STATUS BAR：  [ON] Displays

7 (8) Video Ratio ：Changes the image ratio or Field of View. The original image size is a 5M image (2592*1944) output. (8-1) 4/3F：Formats the ima